coretan-mambang

Category: Education

Opportunity To Study Bachelor In Science In Malaysia
Are you from a STEM field, and are unsure of what to pursue in your tertiary education? Well, you can continue being in the STEM field by pursuing relevant courses offered. However, if you are thinking about being in the medical and science field, then you can opt to study bachelor in science in Malaysia to kickstart your tertiary education in the medical and science field.

Where to pursue bachelor’s in science in Malaysia?

There are quite a few universities that provide bachelor’s in science in Malaysia. Do note that bachelor in science is a broad term, whereby under bachelor in science, there is a more specific field that you can enrol in. Here is a list of universities that you can consider signing up for to pursue a bachelor’s in science in Malaysia:
- University of Malaya (UM)
- Universiti Kebangsaan Malaysia (UKM)
- Universiti Putra Malaysia (UPM)
- Sunway University
- Universiti Tunku Abdul Rahman (UTAR)
What is a bachelor’s in science?

As aforementioned, a bachelor in science is a broad term to represent learning science in general. To break it down even more, here are two kinds of sciences that you can look into: Applied Sciences and Pure sciences. Let’s take a look at the applied sciences first.

Applied Sciences

Like the term mentioned, applied sciences is a term where you are able to develop practical applications by applying the existing knowledge of science. What this means is, that applied sciences normally is done outside a laboratory, meaning a full hands-on experience with the surroundings and people. Some applied sciences are:
- Medical Science
- Computer Science
- Forensic
- Environmental Science
- Nanotechnology
- Kinematics
Pure Sciences

Pure sciences, on the other hand, highlight more theories and predictions to understand life and the world in general. Compared to applied sciences, most of those who pursue pure sciences would work in laboratories and in their own workspace, as they will be spending most of their time doing experiments to prove their theories. Some pure sciences fields are listed down below:
- Chemistry – Chemist, Biochemist, Geochemist
- Biology – Botanist, Anatomist, Zoologist
- Physics – Physicist, Astronomer, Meteorologist, Mathematician
What career opportunities can I expect to pursue when taking a bachelor’s in science?

Depending on which specific line you choose when pursuing bachelor’s in science, nonetheless, there is various line of work you can go into once you’ve graduated from a bachelor’s in science. Here’s a list of career paths available to you if you decide to pursue bachelors in science:
- Nurse
- Dentist
- Chemist
- Biologist
- Pharmacist
- Physiotherapist
- Software Engineer
- Mechanical Engineer
- Civil Engineer
- Geologist
And there you have it. A thorough rundown of what it takes to pursue bachelors in science in Malaysia. The time duration of the bachelor’s degree also depends on which specific course you want to pursue. Normally it would be 4 years, however, the medical stream usually takes longer than that as the medical stream needs to undergo a medical internship (also known as housemanship) for extra 2 years compared to other science streams.

Take your time in choosing the best course for you, and all the best in living your life as a university student!
August 25, 2022
Jobs in Malaysia You Should Consider Studying

When choosing the right course to study in Malaysia, one important criteria that students should look at is the job demand. Choosing to study a course that has future potential, high job demand and salary would ensure that you have a higher chance of a successful career that would support your lifestyle goals.

With the evolution of technology, the current job landscape in Malaysia has dramatically changed. Many countries and industries are currently demanding occupations and specialists that did not even exist in the past 10 or 5 years ago. The rise of technology has led to a disruption in the way humans work and live. This digital era has truly evolved around the globe.

Malaysian employers are investing in digitalizing their businesses in order to improve their worldwide competitiveness, strengthen growth, and productivity, while also creating high-value-added jobs as an alternative to depending on foreign labor.

RM210 million in funding will be made available from 2019 to 2021 to support the transition of local businesses to the “Readiness Assessment Program,” which will serve as a commitment to upskilling the workforce as a demonstration of the government’s ambition in accelerating Industry 4.0 adoption and implementation.

As reported by the Malaysian Social Security Organization (SOCSO), various forms of automation were responsible for the majority of job replacements in the country in 2018. While manufacturing and construction were the most severely affected industries, the agency warns that the financial industry will be the next to be hit. As a matter of fact, according to a 2017 McKinsey global research, already-available technology can automate 43 percent of all banking and insurance operations.

In this digital era of economy, the rate among Malaysia’s fresh graduates is expected to rise up to 25% in the year of 2020. In comparison to last year, it is a jump from 13.8%. The Ministry of Higher Education (MOHE) said that 75,000 from 300,000 fresh graduates are expected to be unemployed in 2020 due to the economic downturn caused by the pandemic of COVID-19 virus outbreak.

A further point to mention is that 41,161 graduates from the class of 2019 are still unemployed. With the addition of 75,000 people starting in 2020, the overall number of unemployed people in the group will reach an all-time high of 116,161 people. Meanwhile, last year, Only 189,543 of 330,557 graduates were able to secure employment six months after completing their studies.

Students who have fallen behind in their studies sometimes have outmoded information and lack the appropriate requisite skills by the sector, which contributes to the increasing unemployment rate. Consequently, if you do not plan wisely, you may eventually wind up pursuing a course that will not be in the growing market when you graduate due to a lack of career prospects. This would be a complete and utter waste of your time and efforts.

Even though, times are hard for the fresh graduates students, there are still a chances and better hope for the next generations. Study bachelor of surgery in Malaysia could really be helpful tips and wise words that we can share with you.

December 16, 2021
The right guide to nursery for the parent and child.

When you’re expecting a kid, and especially for the first time, then you’re undoubtedly panicking quietly because of the significance of the circumstance. Therefore, you need all the assistance you can receive, but not just any assistance.

Taking care after your birth, the new mother.

Once your baby is delivered the postpartum period begins and concludes when your body is almost pregnant. It commonly lasts between 6 and 8 weeks.

The after-partum phase includes numerous emotional and physical adjustments. Furthermore, with a new mother, you learn how to handle all the adjustments needed. You and your partner also learn how to take care of your newborn child and learn how to function as an altered family unit throughout the postpartum time.

To recover your strength, you need to be well cared for. During the first few weeks you will need plenty of rest, decent food, and help.

Rest for the parent.

All new parents will soon realize that the time clocks of babies are different from adults. A typical infant wakes up around every 3 hours to be fed, replaced, and reassured. You and your spouse may be swamped with fatigue, particularly if this is your first kid. Over several months, you may not be able to sleep for 8 hours. Here are suggestions to help you relax:

· You have to let someone else take care of your infant and take care of yourself in the first few weeks of your life.

· Sleep while sleeping. Sleep when sleeping. It could be just a couple of minutes’ respite, but those minutes could mount up.

· Save time and steps. Have a bed near yours for your infant for night-time feedings.

· It’s good to have friends and family come, but don’t feel like you need guests to entertain. Feel inclined to apologise for a sleep or feed your child.

· Get out everyday for a couple of minutes. As your health care physician has instructed you may start walking and do postpartum activities.

Nutrition

During pregnancy and birth, your body underwent a lot of changes. Time is needed to get back. Besides relaxation, a nutritious diet needs to be eaten to help you.

Pregnancy weight helps create retreats and lactation facilities. You need a nutritious and well-balanced diet after delivery so that you can be active and caring for your kid.

Most experts on lactation recommend eating in hunger. But many moms may be so weary or occupied that food is overlooked. It is therefore vital to arrange nutritious, simple food, which includes selections from all advised groups.

Help your workers take on tasks like cooking, cleaning, cleaning, and buying food. This helps you care for yourself and prevents you from limiting your baby’s time.

If you are unable to move around physically and need an online baby store in Malaysia, please be sure to visit Pigeon for all your baby related products.

September 6, 2021
Getting the right Defoamer for your Processes.

A defoamer is chemical additives that decrease the shape of foam in commercial operation liquids or prevent them from developing. We will examine defoamers with respect to paints, inks, adhesives and even building goods for this post.

The words anti-spum and defoamer are usually used indiscriminately. Anti-spam agents, however, refer more precisely to compounds which impede bubble production and development. They consist of polydimethylsiloxanes, other silicones, hydrophobic oils, europes and glycols and inorganic pollutants, such as silicones and talc, depending on their usage and compliance levels.

How the process occurs

Foam is a rough gas dispersal in a liquid when the gas component is more voluminous than the fluid fraction. The bubbles move to the surface because they are smaller than liquid densities. As the bubbles cluster and gather at the interface between air and surface, the bubble walls thin and shatter.

Defoamers speed up the process and also break the tiny bubbles. Typically, a spray is insoluble and possesses active surface characteristics in the spray medium. The capacity to spread fast on moist surfaces is a crucial property of a defoamer.

The selection of a defoamer gets very much to do. In case of paints, it is important to maintain a long lifetime, although the defoamer (typically based on oils), such as rub-up, cannot influence color consistency. Mineral oil is not a possibility for aqueous flexographic tints, as it causes swelling of rollers and plates.

Therefore, glycols and polyglycols are the chosen defoamer (ethers). The application of silicone defoamers in solvent and high-viscosity systems is more common in the grind phase of pigment dispersion than in the let-down.

Choosing the right defoamer technique

It is important to choose the right test technique, including a suitable substratum and storage tenacity. For instance, a powerful defoamer may be required when manufacturing a waterborne polyurethane or acrylic urethane, since micro foam is released by the application to a porous woody substratum and the surface energy for the coating is very high.

The film may display significant crawling and fisheyes if a movie is projected over a sealed paper chart such as a Leneta 2C card. There being an overdose of defoamer, the result may be. Testing the Leneta R1A splaying white would nevertheless reveal that film flaws and bubbles are uniformly covered without any deficiency.

Which one works best for you?

In short, in a painting formulation, defoamers are necessary components to avoid the production of foam in waterborne as well as solvent-borne paints and to stabilize them. For maximum defoamer function, proper selection of defoamer quality and quantities is important.

In order to be successful in the coating system, defoamers compete with foam stabilizing chemicals. The right spray results in paint quality characteristics and it is necessary for test methods to be suited to a particular application or procedure.

If you are looking for a reputable defoamer in Malaysia, do go and visit 3D Resources for all your antifoaming needs!

August 21, 2021
Inventions That Helped Us Survive Covid-19

We humans, the one thing we should be proud of is how far our survival instincts can save us. We have gone through several different pandemics in human recorded history, and none of it wipe us out of existence. We all know the most recent worldwide pandemic. The one that overwhelmingly took over the world, that one that pushes us to adopt the “New Normal” with wearing masks and stay at least 1 meter away from each other… Yes, The covid 19. The virus has been terrorizing us for over a year now but there is always a silver lining to every situation!

Let’s talk about inventions that have appeared during the pandemic and have been of help during the hellish saga!

“No-Hands” Door Handles

One of the biggest things during the pandemic is washing your hands, as the virus can be spread through skin contact. Some of us don’t have the luxury to do our errands online, so a supermarket based in Finland pop up with a creative solution to this issue!

They came up with long curved fridge door handles. They call it the no hands door handle because the design lets people the doors with their arms rather than their hands. This will reduce the surface to skin virus contraction by a lot!

Portable Home Gym

Most often than not, non-essential establishments are closed during the pandemic which includes places like the gym. People who have workout routines were losing their minds because they can’t maintain their workout plan anymore. But, a fitness company called OYO Fitness saw the demand for this and they come out with portable, and, of course, very affordable home gym gear! It utilizes a technology called “SpiralFlex” that makes it possible for people to use various weights, depending on their needs while working out!

On The Go Disinfectant

We are all trying our best to protect ourselves from the Covid-19 virus. We do basic precautions such as wearing a mask and changing our clothes after going outside, we try our best to wash our hands, always, and, last but not least, sanitizing our hands every chance we get. But sometimes we’re not too sure and we feel like we need to take chemical baths just to put our minds at ease. Well, Dr. Yoo, based in Malaysia, invented a disinfectant stick called Dr.Clo. You just have to bend it when you want, and it will release a disinfecting agent called chlorine dioxide. It will clean the air it touches! It is very compact, fool-proof, has cute packaging, and also will help us ease our anxiety. There are different sticks for different environments too.

Those are only a few out of countless inventions made by us, to help us survive this pandemic. Though we are in a less-than-ideal situation and things can be tough, just know that there is still good happening in this world. Stay hopeful, stay safe, and get vaccinated!

July 15, 2021
Everything College Students Should Know About Internships

Keen To Know More About Internships?

College students of today go through internships. Some people think that such a process is a waste of time, but what they don’t realize is that it can actually give college students a lot of benefits.

Benefits of Internships

Internships can give college students wider and bigger opportunities. The way it works is that employers tend to hire college graduates who have gone through internships easier compared to the ones who didn’t. It is because employers know that those who have gone through requires less training and would be able to handle more responsibilities. Aside from that, there are even companies who would be willing to give a work contract even while still an intern once they find your performance admirable.

Internships can help when it comes to financial problems. We all know that college isn’t cheap. It requires a great amount of money for tuition, allowance, and other miscellaneous fees. There are companies out there who give daily salary to interns. College students can use this for their tuitions and allowances.

Internships can give college students the assurance they need. There are college students who up until now are still hesitant and confused with the path they are taking. With internships, they get to experience what it is really like working in their chosen field. This could give them the assurance they need to continue pursuing such choice. Through this, they’ll be able to graduate more confident knowing that they are on the right path.
There are just so many benefits there is if college students go through all the trouble of internships.

Now, preparing for an internship is just like preparing to apply for a job. And just like applying for a job, one could get rejected or denied. If they passed through, all they’d have to worry now is their performance. So to help college students out, we too have some tips they could use to be able to get good ratings through their internship period.

There are companies out there who would require uniforms, but there are also some who don’t. Those tend to follow dress codes. As an intern of a certain company, one must know the different dress codes. Even if they are not really an official employee, following dress codes is a must since it shows their supervisors how they respect and value their time in their internship period.

Being attentive and taking notes during the first day is a very important step. It is because the first day is basically an orientation day. This is where supervisors discussed to their interns their responsibilities, rules, how the workplace functions, and everything one needs to know. Interns are expected to memorize this and thus to save them the trouble of forgetting, it would be best for them to take notes. It avoids them from stress and hassle.

Giving impressions is very important. An intern must be able to give impressions even still on the interview. During the first day, it is best to be enthusiastic and interact with people, but not too much that it gets to the point that it would annoy them. It is important to show good manners and show great skills during the first day since it would be the time where supervisors would really observe their interns. You must be able to be well-dressed and charm people not just with your skills but also with your personality. If you’re more of an introvert, you need to break free from it.

Showing up on time will get you good ratings. Even if interns are not an official employee, it is very important for interns to show up on time. It would even be best if one would show up punctual compared to official employees. It would show how dedicated they are to their internships.

Take a look at this video to know the common mistakes made during internships:

So those are some of the tips college students could use to be able to get good ratings during their internships. It is necessary for them to get good ratings for it can help a lot to their work application. It could get them better opportunities. The job platform, Kerija, would be able to help a lot of college students with searching for an internship in KL. They would be able to offer good experiences to their interns.

December 30, 2019